16
3.2.6.
Use ViULinx Lite
System
1.
Connect antennas to RF ports of the air unit.
2.
Connect camera HDMI output to HDMI port of the air unit.
3.
Connect the PPM/S.bus port of the flight controller to the RC port of the air unit.
4.
Connect the flight controller telemetry port to the serial port of the air unit.
5.
Turn on the camera and set the video format to 720p or 1080p.
6.
Connect a 12V DC power to the power port of the air unit and turn on the power.
7.
If latest firmware is desired, connect the air unit to a PC or a Laptop using USB cable
and run ViuLinx
TM
PC program to upgrade the firmware of the air unit to the latest
one.
