Tainet Xstream 1300 Series, User Manual

Page: 24 / 86

CHAPTER 2 INTERFACING
1. L : Local/Remote. Local or Remote operating indication. L represents
operating in local, and R represents operating in remote.
2. 2048 KBPS : Speed indication. The item indicates the speed setting if
the system is not in DATA mode. Otherwise, it indicates connection
speed.
3. CO : System operation indication. CO indicates that the system is set
up to CO mode, CPE is CPE mode.
4. connected : Operating status indication. Those status include :
idle : Idle status
handshaking : Handshaking
training : In training
linked : The DSL link has been created
sync hunting : Synchronous word is hunting
connected : In data mode
local loopb : In local loop-back test mode
digital loopb : In digital loop-back test mode
disconnect : Disconnecting
5. 42 : S/N value in connecting.
6. I : Clock source indication. I represent internal clock,
D represents DTE clock, R is receiver clock.
2.1.3 Status Indicators
The status indicators of the XSTREAM 1300 are composed of eight LEDs,
PWR , CPE , DSL , DTE1 , DTE2 , SQ , ALM and TST . These eight
LEDs display the system status. Table 2-1 describes the functions of the
status indicators of the XSTREAM 1300.
12