Taiden TMX Series, Installation And Operation Manual

Page: 10 / 21

3.2 Output type
Select the type of output signal, including: VGA, SDI,
HDMI.
3.3 Out resolution
Select the resolution of output. Different type of output
has different selections of resolution:
When output type is VGA, the out resolution includes:
800x600p60, 800x600p75, 1024x768p60,
1024x768p75, 1280x1024p60, 1280x1024p75,
1360x768p60, 1600x1200p60, 1400x1050p60
；
When output type is HDMI, the out resolution includes:
1280x720p60, 1280x720p50, 1280x720p30,
1280x720p25, 1920x1080i60, 1920x1080i50,
1920x1080p60, 1920x1080p50, 1920x1080p30,
1920x1080p25, AUTO (select the best resolution
automatically according to EDID);
When output type is SDI, the out resolution includes:
1280x720p25, 1280x720p30, 1280x720p50,
1280x720p60, 1920x1080i50, 1920x1080i60,
1920x1080p25, 1920x1080p30, 1920x1080p50,
1920x1080p60.
3.4 Line in sens.
Adjust the line in sensitivity of analog-audio. Range:
-12dB to 6dB, step: 3dB. If the input type is SDI or
HDMI and that without video input, the line in sensitivity
can not be adjusted.
1
. Press “MENU” to enter and press “
Õ
/
Ö
”
until “Line in sens.” prompts;
2. Press “MENU” to enter setup;
3. Press “
Õ
/
Ö
” to select parameter;
4. Press “MENU” to confirm.
4. Line in sens.
-12dB
4. Line in sens.
▋
-12dB
4. Line in sens.
▋
-6dB
4. Line in sens.
-6dB
In:YPbPr Out:VGA
Res:800
×
600p60
1
. Press “MENU” to enter and press “ Õ / Ö ”
until “Out resolution” prompts;
2. Press “MENU” to enter setup;
3. Press “ Õ / Ö ” to select parameter;
4. Press “MENU” to confirm.
3. Out resolution
800
×
600p60
3. Out resolution
▋
800
×
600p60
3. Out resolution
▋ 1024 × 768p75
3. Out resolution
1024
×
768p75
In:YPbPr Out:VGA
Res:800
×
600p60
1
. Press “MENU” to enter and press “
Õ
/
Ö
”
until “Output type” prompts;
2. Press “MENU” to enter setup;
3. Press “
Õ
/
Ö
” to select parameter;
4. Press “MENU” to confirm.
2. Output type
VGA
2. Output type
▋ VGA
2. Output type
▋
SDI
2. Output type
SDI
In:YPbPr Out:VGA
Res:800
×
600p60
Note
：
) If “SDI” is selected, the HDMI output will
export the same resolution and the VGA
output will be turned off.
) If “HDMI” is selected, the SDI output will
export the same resolution and the VGA
output will be turned off.
) If “VGA” is selected, the SDI output and the
HDMI output will be turned off.
Note
：
) 1920x1080p60, 1920x1080p50 and AUTO are
nonsupport when the input type is CVBS.
4