3.9.3 Connection
3.9.3.1 Multi-function connector connected to
the CMU or the EMU
When connecting to the CMU or the EMU, the
HCS-4842DHT channel selector must be connected to
the HCS-4840DHT multi-function connector, and the
multi-function connectors connected to the CMU or the
EMU in a daisy-chain arrangement with the 8-PIN
cable.
Figure 3.9.3 HCS-4840DHT connected to CMU/EMU
For a longer distance between the contribution unit and
the CMU/EMU, a CBL8PS extension cable can be
used. One end of this cable is equipped with a 8P-DIN
male connector, the opposite end is equipped with a
female connector. Just connect the female connector of
the cable to the contribution unit, and connect the male
connector to the output of the main unit. The Cat5e
cable can also be used as an extension cable, one end
of the Cat5e cable is connected to output of the main
unit via the CBL8P2RJ45S converter cable; the other
end of the Cat5e cable is connected to the 8P-DIN
male connector of the contribution unit via the
CBL8S2RJ45S converter cable.
Figure 3.9.4 HCS-4840DHT connected to CMU/EMU2
For “Closed Loop - Daisy Chain” ring connection,
HCS-8600MCLS Loop switcher is needed. The "TO
MU" port of HCS-8600MCLS is connected to the output
of the main unit via CBL8P2RJ45 converter cable; the
other port of HCS-8600MCLS is connected to the
contribution unit via CBL8P2RJ45 converter cable; at
last, connect the last contribution unit back to the CMU
via a CBL8PS extension cable.
Figure 3.9.5 “Closed Loop - Daisy Chain” connection
topology
3.9.3.2 Connections between multi-function
connectors
All HCS-4840DHT multi-function connectors are
daisy-chained easily and conveniently by dedicated
8P-DIN cables.
When connecting to another congress unit, just
connect the 8P-DIN standard male connector on the
2.1-meter cable of the next multi-function connector to
the
8P-DIN standard female socket of this
multi-function connector
Figure 3.9.6 “Daisy-chain” connection between
HCS-4840DHT multi-function connectors
130
Summary of Contents for HCS-4800 Series
