10
5. After installation, it will create the desktop and start
menu shortcuts.
2.4.2 Touch Screen Calibration
Start touch screen driver “TouchScreenSetup” to
calibrate.
1. Setup operation language: English or Chinese;
2. Select serial port in serial device manager;
3. Set up calibration in setup menu, default is ok for
general user;
4. Select calibration type (4 points / 9 points / 25 points),
and then click "Calibration" to start;
5. Click the screen to calibrate the touch screen;
6. After calibration, click "Line Test" to check dead
zone.
7. Calibration is complete, double-click the screen or
press the <Enter> key to save the calibration data.
