Taiden HCS-4345NTK Installation And Operating Manual Download Page 9

 

  3

1.3 FAQ                                                             

1. Direct judgement is not accurate in bi-directional 

access 

When IR function is enabled, only one direction should 
be accessed at one time and avoid bi-directional 
access, as the following figure: 

 

 

2. Tag detection is not accurate when more than 

one person pass through the passage 

side-by-side 

When more than one person pass through the passage, 
they should pass through one by one and avoid 
side-by-side, as the following figure: 

 

 

3. No reaction when pass through too slow 

Maximum time limit is set when passing through. If 
walking too slow and exceed maximum time limit, 
direction judgement will be disclaimed. 

 
 
 
 
 
 
 
 
 
 

 

4. It will alarm when quickly reentry after pass 

through 

Passage filters tags when detecting, how long does 
filtering take is decided by "tag filtering time". In the 
period of tag filtering time, the same tag is processed 
only one time. If the person passes through the 
passage and then quickly reentry within "tag filter time", 
reentry tag will be filtered, and causing alarm. 
To ensure the accuracy of direction judgement, 
immediate reentry is prohibited. Please wait 5 to 10 
seconds after pass through. 
 

5. Other person's information is displayed 

First-come-first-serve rule is applied in tag detection. 
When more than one person pass through the passage, 
the information of the first detected tag will be reported. 
If some one stands inside detection area, when other 
person passes through the passage, the tag 
information of whom stands inside detection area will 
be reported. 

 
 
 
 
 
 

6. How to deal with the case that one person takes 

more than one card 

"One person-one card, more cards-waiting time-out" 
rule is applied in tag detection, i.e., when one person 
passes through the passage, one tag information will 
be reported, and the rest tag information will be saved 
in cache and waiting for the next person or later 
reported as time-out information when reached "tag 
time-out". 
When one person takes more than one card, the first 
detected tag information will be reported, and the rest 
tag information will be reported as time-out information. 

 

 

Note: 

)

  Standing inside detection area for a long time 

should be avoided!!! 

Note: 

)

 Normal walking speed is recommended, 

please do not stop inside the passage. 

Summary of Contents for HCS-4345NTK




















Reviews: