17
2.4.5 System setting
“Setting” submenu includes:
1. “Loudspeaker Volume Setting”
Adjust built-in loudspeaker volume of contribution units
(except interpretation units), range: -30 dB - 0 dB.
a). Press the “
Õ
/
Ö
” button to adjust volume;
b). Press the “MENU” button to save and return to
upper level menu.
2. “Loudspeaker Mute Setting”
Mute/Not mute loudspeaker of contribution units
(except interpretation units).
a). Press the “
Õ
/
Ö
” button to select mute or not;
b). Press the “MENU” button to save and return to
upper level menu.
3. “LINE IN 1 Mode Setting”
Select LINE IN 1 mode from “Line input” or
“Microphone Input”.
a). Press the “
Õ
/
Ö
” button to select “Line input” or
“Microphone Input”;
Select “Line input” and press the “MENU” button
to save and return to upper level menu;
Select “Microphone Input” and press the
“MENU” button will go to step b);
b). Press the “
Õ
/
Ö
” button to select phantom power
on/off, phantom power is used for connecting
condenser microphone;
c). Press the “MENU” button to save and return to
upper level menu.
4. “Line Out 2 Mode Setting”
Set up Line Out 2 microphone output mode.
a). Press the “
Õ
/
Ö
” button to select “On” or “Off”;
Select “On” stands Line Out 2 will output mixed
audio of microphone signals, Line In 1 signal and
Line In 2 signal;
Select “Off” stands Line Out 2 will output mixed
