background image

4

SAFETY INFORMATIONS

Before using the equipment, carefully read all the safety labels and warnings related to the equipment as well as all the

instructions contained in this Guide or the Equipment Installation Guide and retain them in a safe place for future reference. It is the
owner's responsibility to ensure that all users of the equipment are adequately informed about the safety precautions and use. The
misuse of this equipment could result in health hazards. The manufacturer assumes no responsibility for personal injury or property
damage incurred by the improper use of this equipment.

PRODUCT
Two or more people will be required to assemble this equipment. Make sure that the floor is flat and there is sufficient space to

mount, dismount, and use the equipment. Remove the equipment from the packaging. Do not discard the packaging until the installation
is complete. Proceed with the assembly and make sure that the equipment is firmly installed and that all parts are tightened correctly.
The equipment must be retained in the original configurations of the project. Do not carry out any modification that alters the equipment,
which could result in the loss of the product warranty.

Replace damaged parts with original parts and regularly carry out preventive maintenance;
Replace defective parts immediately and/or take the equipment out of use until it is repaired;
Replace damaged labels;
For equipment with a weight stack, never use a system of weights if the top adapter plate is attached in a higher position

relative to the others;

Adjust the required force so that exercises are smooth and uniform;
Inspect the equipment before use, especially cables, pulleys, fittings, canvas, attachment of the seat/saddle, pedal and shoe,

moving or adjustable parts when applicable. Make sure that all the pieces and parts are securely fastened;

Never release the anklet, handles or bar while the weights are raised: the weights will fall with a lot of force and this can

damage the equipment;

The training equipment shall only be used in areas where access and control is specifically regulated by the owner.
The training equipment shall only be used in supervised area.

PERSONAL
Consult your doctor before starting and during any exercise program. Special attention should be given to children, pregnant

women, the elderly, people with heart problems and those with a disability or pre-existing health problems.

Keep children and pets, away from the equipment especially during use. Children should be watched so they do not to play

with the equipment, whether or not it is in use.

The equipment is not intended to be used by children or people with some reduction in their physical, sensory or mental

capacity, lack of experience and knowledge, unless they have been given the necessary instructions for the use of the equipment and be
under the care of a person who is responsible for their safety.

When the machine is in motion never put your hands on the column weights covers (if applicable) or any moving parts. Do not

insert any object in the openings. Never carry out any adjustments, cleaning or maintenance when the equipment is in motion.

Keep your body, clothes and hair away from any moving parts so that you do not suffer an accident or serious injury.
Do not allow more than one person use the equipment at the same time, except in those stations that are designed for this

purpose.

Use the settings provided by the equipment and place yourself in a comfortable and adequate position on the equipment.
Stop any exercise if you feel any dizziness, chills, shortness of breath, tachycardia, headache or chest pain, weakness or

breathing difficulty.

Wear appropriate athletic attire. Do not wear loose clothing that could eventually become caught in the equipment. Always

wear athletic shoes for exercising.

Do not perform any exercises 1 hour before or 2 hours after meals. Hydrate yourself during the exercises.
Before you start the exercise it is recommended that you warm up for 5-10 minutes, doing rhythmic exercises that will move

every muscle so you not damage the muscle during the exercises. Stretch before and after your session. Inhale and exhale while
exercising to relax and coordinate breathing with the movement. Once a muscle has been exercised rest it for 48 hours before exercising
it again. The exercises are efficient and you can get the most out of the equipment if you are supervised by a professional.

The person exercising should face the equipment at all times during the exercise. The weight stacks should remain within the

field of vision of the user throughout exercise to prevent danger to the third party.

Note: For your convenience and quick access, basic safety information, also available in sticker fixed on tower.

Summary of Contents for S-Line 708











Reviews: