Using the Removable Hard Disk
Using a Removable Hard Disk Drive Adapter
6-10
SPARCbook Portable Workstation User Guide
ò
Inserting an RHDD
1.
Before inserting the drive, set the drive’s SCSI ID, as described
in “Setting the SCSI ID for the RHDD” on page 6-7. The
RHDDA does not have a SCSI ID of its own but takes its ID
from the RHDD installed in it.
2.
Slide the drive’s integral catch/cover downwards; see Figure
6-4.
3.
Tilt the front of the RHDDA upwards slightly and slide the drive
into place until you feel the connectors engage.
4.
Slide the drive’s catch/cover upwards to lock the drive in place.
5.
Configure the drive as described in “Using Additional
Removable Hard Disks” on page 6-7.
Figure 6-3 Connecting an RHDDA
1
2
3
4
ON
S3UG4_Book Page 10 Friday, August 8, 1997 11:37 am
