User Configuration Manual TGW4/8 Gateway Series for Aeonix
26 Tadiran Telecom (TTL) L.P.
2.4 FXS Subscriber Line
2.4.1 Phone Number
After login, click the
Line > Phone number
tab to open the Phone number configuration interface.
Figure 2-15
Configuration Interface for Phone Number
Table 2-11
Configuration Parameters of Phone Number
Note: * indicates mandatory parameters for Aeonix.
Name
Description
FXS 1st line No.
This number is used for the batch setup of consecutive numbers of subscriber lines.
Click Batch after filling in the initial number, the number of Line 1 adopts the initial
number; that of Line 2 increases 1 progressively based on that of Line 1, and so on.
You do not have to fill in if you do not use batch configuration or the number is not
consecutive.
*
ID n
Fill in the Aeonix telephone number (Alias) associated with the subscriber line n (FXS
port). This should be manually performed if Batch mode is not used.
(The dial numbers used by Aeonix.)
