Basic Call Features
40
Attended Transfer: Transfer a call with prior consulting.
To perform a blind transfer:
1.
Press or tap the Transfer soft key during a call.
2.
Enter the number you want to transfer the call to.
3.
Press or tap the Transfer soft key to complete the transfer.
The call is then connected to the number to which you are transferring.
If you are using a handset, the transfer can be completed by hanging up the handset.
Conference
You can use the T48G/S IP phone to create a conference with other two parties using the
phone’s local conference or create a conference with multiple participants which is
called network conference.
Note
The T48G/S IP phone supports up to 3 parties (including yourself) in a conference call.
This is the default method of conference called Local Conference. You can create a
conference between an active call and a call on hold at any time by tapping the
Conference soft key.
To set up a local conference call:
1.
Place a call to the first party.
2.
When the first party answers the call, tap the Conference soft key to place a new
call.
The active call is placed on hold.
3.
Enter the number of the second party, and then press , , or tap the
Network conference is not available on all servers. For more information, contact your
system administrator.
