Tadiran Telecom FlexSet-IP 280S User Manual Download Page 149

Page: 149 / 283

Station Telephony Features

138

FlexSet-IP 280S User Guide

Messages: Options

Messages: Options

You can leave a message at another station and conversely, any station can leave a message at your station.
Press

[Msg]

to access the message options.

[Msg.]

Leave Message

is used to leave a message at another station, or to access messages left at your station.

Viewing and answering messages left at your station:

1. The message lamp flashes and a bullet appears next to the

[Msg]

and

[Msg.]

keys when there is a message waiting. The

message consists of simple text, such as

CALL SUSAN

, or

CALL VOICE MAIL

, which is displayed on the top line.

2. Choose one of the following options after pressing

[Msg.]

[Prev]

To view the previous message. If there is no previous message,

LIST START

appears on the top line.

[Next]

To view the next message. If there are no other messages, then

LIST END

appears on the top line.

[Call]

To call back the message sender. The message lamp is turned off if there are no other messages.

[Dest]

[LveMsg]

To leave a message at another system station, dial a station, boss group or network number, and listen for
the confirmation tone.

[Cancel]

To cancel the message and the flashing message lamp without calling back the message sender.

[Number]

To briefly display the number of the person who left a message.

Page 1

10:50

26 May 2007 Company xyz

user name

station number

↓→ •

[Msg]

CALLog

Fwd

DND

FlexiC

Page 2

Message Options

→

•

[Msg.]

MsgCan

Msg-Wt

Summary of Contents for FlexSet-IP 280S




























































































































































































































































































Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet-IP 280S, User Manual

Search results

Summary of Contents for FlexSet-IP 280S

Reviews:

Related manuals for FlexSet-IP 280S

Brands by name

Popular brands