Station Telephony Features
126
FlexSet-IP 280S User Guide
Headset Only
Headset Only
The feature is designed for users operating in
Headset
mode. It is of particular value at information centers where the headset
option is the most efficient way of communication. When activated, the Headset Only feature causes calls to be conducted via
the headset and disables the FlexSet’s microphone and loudspeaker, along with the features that use these devices, e.g. voice
page, etc. Calls are conducted via the headset even if the cradle switch is on-hook, enabling a user to make full use of the
hands-free operation.
NOTES!
When utilizing Headset Only feature:
• The
SPKR
key should be programmed as an ON/OFF (connect/release) key. See your system administrator.
• The phone can be set for
Zip Tone
mode. This mode is used to sound the ring tones directly through the
headset, rather than through the speaker. (For
Zip Tone
setup, see
• Refer to
for instructions on operating a
FlexSet
programmed as Headset Only.
To activate Headset Only:
•
Press
[Setup] [HeadSt]
A bullet appears to the left of
[HeadSt]
.
To disable Headset Only:
•
Press
[Setup]
•
[HeadSt]