manualshive.com logo in svg

Tadiran Telecom FlexSet 280S, User Manual

Share
Download
Tadiran Telecom FlexSet 280S User Manual Download Page 48

 

Receiving Calls 

40 

FlexSet 120S/280S User Guide 

 

Receiving Calls 

There are several ways to answer calls. Answer the call directly by using the conventional methods such as pressing 
the flashing 

SPKR

 key, lifting the handset or pressing any flashing key (DSS, LOOP, Line, etc). Other options 

include using one of the state-related Coral system telephony features before you answer or diverting the unanswered 
call. The state related features automatically appear, as shown in the display below: 

 

caller #

 

  

  

 

 

 

 

 

 

DND

 

 

 

Mute  

FwdAll  

All-E

 

Number

 

 

caller #

 

 

 

 

 

DND 

Mute  

FwdAll

 

 

[DND]

 

Do Not Disturb

 is used to send a reorder (busy) tone to the incoming call, thus avoiding answering the 

call. Once DND is activated, all incoming calls will receive reorder tones. 

(page 87)

 

[Mute]

 

Mute

 can be activated during ringing before answering so that when the call is answered your side of 

the conversation is muted, and the caller will not hear you. When this feature is activated by the 

[Mute]

 

on/off toggle switch, a bullet appears. The mute feature deactivates the microphone for your 
speakerphone and handset or headset. Press the toggle key again to restore the microphone. 

[FwdAll]

 

Call Forward All

. Use this feature to forward all incoming calls to another destination. To operate, 

press the 

[FwdAll]

 soft key when your FlexSet is ringing and select the destination. 

(page 66)

 

[All-E]

 

Call Forward All External

. Relevant for external calls only. Use this feature to forward all incoming 

external calls to another destination. To operate, press the 

[All-E]

 soft key when your FlexSet is ringing 

and select the destination. 

(page 66)

 

[Number]

 

Number

 is used to briefly display the caller’s dial number instead of the name. 

[Divert]

 

Divert

 is used to divert an incoming call to another system station, group or Library number. 

(page 81)

 

1. Press 

[Divert]

. 

2.  Enter the required destination number. 

[CallWt]

 

Calls Waiting

 is used to view the number of calls waiting for you (including this incoming call). 

Summary of Contents for FlexSet 280S






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands