manualshive.com logo in svg

Tadiran Telecom FlexSet 280S, User Manual, Page: 30 / 253

Share
Download
Tadiran Telecom FlexSet 280S User Manual Download Page 30

 

Operating the FlexSet 

22 

FlexSet 120S/280S User Guide 

Using the Speakerphone or Headset 

When the FlexSet is programmed as Headset Only and for SPKR On/Off key 

When your FlexSet is equipped with a headset:  

When the Headset Only feature is activated, and the 

SPKR

 key is set to operate as On/Off (connect/release) switch, 

you can answer and disconnect calls by pressing the 

SPKR

 key.  

When the key LED is lit: 

You are connected. Pressing the lit key will disconnect the call. 

Disconnecting calls: 

Press the lit 

SPKR

 key. 

NOTE:

 

See your system administrator to 
program the 

SPKR

 key to operate 

as On/Off switch. 
When the FlexSet is set for Zip 
Tone mode, the ring sounds at the 
headset only rather than through 
the speaker 

(see page 162)

. 

If the FlexSet is defined as 
Headset Only 

(see page 158)

, the 

speakerphone will not operate. 

Summary of Contents for FlexSet 280S






























































































































































































































































Reviews:

No comments