manualshive.com logo in svg

Tadiran Telecom FlexSet 280S, User Manual

Share
Download
Tadiran Telecom FlexSet 280S User Manual Download Page 229

 

Appendix D – Feature Codes and Soft Key Descriptions 

D-1 

FlexSet 120S/280S User Guide 

 

Appendix D – Feature Codes and Soft Key Descriptions 

This appendix details the rich array of options available on your FlexSet. Features are accessed by use of the context-
sensitive soft keys. The features can also be operated by using their dial codes, so that they may be programmed into 
the programmable keys. 

Soft Key 

These are the soft key options displayed on the 3

rd

 line of your FlexSet. This column is arranged in alphabetical order. 

In situations where there are two or three features, one standard, one attendant, and one boss group: 

• 

The attendant feature takes the format 

aXXXXX

  

(for example, 

Trace

 

and 

aTrace

, where 

Trace

 is the standard feature and 

aTrace

 is the attendant feature). 

• 

The boss group feature takes the format 

BG:XXX

.  

(for example, 

Fwd

 

and 

BG:Fwd

, where 

Fwd

 

is the standard feature and 

BG:Fwd

 is the boss group feature). 

Source 

This is the route taken using the soft keys to reach this soft key message. 

Feat

 corresponds to the idle state, or 

 > 

[Feat]

. 

Call

 corresponds to the FlexSet state during a call (ongoing, ringing, etc.). 

Feature Code 

The feature code is the default code (numbering plan) that is used to operate the relevant feature using the dial pad. 
The feature code can be used to pre-program the FlexSet DSS buttons with the specific feature. 
When the soft key links to a sub-menu (e.g. pressing 

[Fwd]

 opens a list of forwarding options), “MENU” is used to 

show that this is a multilevel menu. 
For more detailed information on how to use the feature codes and how to program them, refer to the 

Coral FlexSet 

280, 280D, 280D-Z, 120, 120D and 120L User Guide

, or the 

Attendant Console User’s Guide

. 

See page 141 for 

instructions on how to program a feature into a programmable key by using its feature code.

 

Reference 

Summary of Contents for FlexSet 280S






























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands