manualshive.com logo in svg

Tadiran Telecom FlexSet 280S, User Manual, Page: 220 / 253

Share
Download
Tadiran Telecom FlexSet 280S User Manual Download Page 220

 

Appendix B – Tones 

B-1 

FlexSet 120S/280S User Guide 

 

Appendix B - Tones 

Tones are audible signals of various frequencies that give information about the status of calls and features. While 
using the Coral system, many different tones will be heard. These tones may vary for different locations, as each 
system is customized during installation. While the sounds of the tones themselves are not described, their general use 
is discussed below. In order to familiarize yourself with these tones, try accessing various features and listen to the 
resultant tone signals. The most frequently heard tones are: 

Break-In/Break-Out Tone

A warning tone received by a station user indicating that a third party has broken into, or 
is leaving (breaking out) an existing conversation. 

Break-In Warning 

Tone heard during the entire break-in period. Indicates that a third party is listening (not 
used in North America)  

Busy Tone

Tone heard when the destination you have dialed (extension or trunk) is busy. 

Call Waiting Tone

Tone heard at your FlexSet station while engaged on a call or activating a feature 
indicating that another call is waiting to be answered (this appears only when multi-
appearance is defined for your FlexSet station). 

Confirmation Tone

Tone heard indicating that the telephony feature has been activated or deactivated. 

Dial Tone

Tone heard after off-hooking (lifting) your handset from idle. 

Summary of Contents for FlexSet 280S






























































































































































































































































Reviews:

No comments