Station Features
180
FlexSet 120S/280S User Guide
Wakeup
Wakeup
Use this feature to program your FlexSet to ring at designated times. If you do not answer the call, the FlexSet will
ring 3 more times at 1-minute intervals. If you do not answer by the third call, the wakeup call is routed to the
attendant and a wakeup report is printed.
Press
[WakeUp]
to access the Wakeup options.
10:50 26 May 2004
site name
user name station number
AcctCd
IDCtrl
WakeUp
aWake
CnfIns
W
10:50 26 May 2004
site name
user name station
WakeUp
aWake
CnfIns
Page 1
WAKEUP 10:00am
New
Next
Cancel
WAKEUP 10:00am
New
Next
Cancel
Page 2
Entering first Wakeup request:
1. Press
[WakeUp]
.
2. Enter the time you wish to be called at the
ENTER TIME
prompt
3. Choose
[AM]
or
[PM]
.
Note that four digits are required for a 12-hr clock: (i.e. 0805 for 8:05).
NOTE:
Should you hear the reorder tone, Wakeup is denied at your station (as defined by Class of Service). In
order to make use of this feature, request that the attendant activate Wakeup at your station.
•
To add another Wakeup time, choose
[New]
and continue as above.
•
To scroll through the Wakeup list, press
[Next]
.
•
To cancel the selected Wakeup time (displayed on the top line), choose
[Cancel]
.
When Wakeup call rings:
When the FlexSet rings, the
WAKE CALL NAME/NUM
message appears on the top line indicating that this is a
Wakeup call. Press the
SPKR
key to answer the call. Choose one of the following:
•
Press
[Snooze]
to have the system recall you later; or
•
Press
SPKR
to cancel the reminder.
