Tadiran Telecom FlexSet 280S User Manual Download

Page: 125 / 253

Station Features

117

FlexSet 120S/280S User Guide

Messages: Options

Leaving a message at another system station from idle when message list is empty:

1. Press

[Msg.]

2. Dial a station, boss group or network number.
3. Listen for the confirmation tone.

You will hear a reorder tone when trying to leave a message at stations not equipped with a flashing
message lamp.

When your phone rings (message delivery):

1. Answer the call and check the station number displayed.
2. Deliver the relevant message.

NOTE:

A message left at a Boss Group turns ON the message lamp of the first Boss Group
member only.

[MsgCan]

Message Cancel

allows you to cancel a message that you left at another station.

Press

[MsgCan]

Dial the station, boss group or network number at which you left a message.

Listen for the confirmation tone.

[Msg-Wt]

Message Waiting

The Attendant can use this feature to leave a message waiting indication at a busy or

idle station, room or group.

Leaving a message indication at an idle station:

Press

[Msg-Wt]

(Message Waiting).

Choose

[StRmGp]

and dial a station/room/group number, or scroll through the list using

(

see page

160

)

Choose

[Set]

to assign or

[Cancel]

to deassign message.

Press

[Exit]

SPKR

to exit.

NOTE

A message left at a Boss Group activates the message lamp of the first member of that Boss
Group only.

Summary of Contents for FlexSet 280S






























































































































































































































































Search results

Summary of Contents for FlexSet 280S

Reviews:

Related manuals for FlexSet 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet 280S, User Manual

Search results

Summary of Contents for FlexSet 280S

Reviews:

Related manuals for FlexSet 280S

Brands by name

Popular brands