Tadiran Telecom FlexSet 280S User Manual Download Page 123

Page: 123 / 253

Station Features

115

FlexSet 120S/280S User Guide

Malicious Call Trace

Malicious Call Trace

This feature records the next

(a system defined variable) calls to your FlexSet. A list of the calls can also be sent to

a printer or terminal.
Press

[Trace]

to access the Malicious Call Trace options.

10:50 26 May 2004

site name

user name station number

COS-Sw

Setup

Trace

RoomSt

BG:Fwd

10:50 26 May 2004

site name

user name station

Trace

RoomSt

BG:Fwd

Page 1

Malicious Call Trace

On/Off

Malicious Call Trace

On/Off

Page 2

[On/Off]

Malicious Call Trace On/Off

toggles the Malicious Call Trace on or off. If this feature is activated, a

bullet appears next to

[On/Off]

, and next to

[Trace]

on the Idle screen.

NOTE:

If there are insufficient system resources for the feature to be available at your station, the
message

NO TRACE RECORD

will be displayed.

[Print]

Malicious Call Trace Print

sends a list of the calls to a terminal or printer. The message

CALL TRACE PRINT

appears. The listing is not deleted when printed; it may be printed later with

subsequent updates.

The details recorded are: originating number (for external calls: ANI if available or trunk number if not
available), your station number and the time of calls.

NOTE:

Malicious Call Trace must previously be activated, or the message

CALL TRACE OFF

will

appear and the action will not be completed.

Summary of Contents for FlexSet 280S






























































































































































































































































Search results

Summary of Contents for FlexSet 280S

Reviews:

Related manuals for FlexSet 280S

Brands by name

Popular brands

Tadiran Telecom FlexSet 280S, User Manual

Search results

Summary of Contents for FlexSet 280S

Reviews:

Related manuals for FlexSet 280S

Brands by name

Popular brands