Tadiran Telecom FlexSet 280, Manual

Page: 74 / 132

6-2
Coral Terminal Equipment
Fl
ex
Set
PE
X/
AP
A
-F
, P
E
X
/AP
A
-F
S In
stall
ation
6
FlexSet line lengths. The PEX/APA module contains a control bus connection for the
expansion modules and an audio jack for an additional handset or tape recorder
(listen-in ability only). In addition, the module provides additional electrical protection
against noise and lightning.
The PEX/APA module also provides data transfer in Computer-Telephony Integration
(CTI) applications such as the TAPIdriver, FlexCT Call Center, FlexCT PathFinder,
Computerized Attendant Position (CAP), ACD Group Supervisor and Management
position, and the FlexCT CallMaster (CCM).
Inspect for Damage
1. Inspect the shipping carton for evidence of physical damage or mishandling prior
to opening.
2. Inspect all parts for damage.
3. Report any damage to the carrier immediately.
4. If it is necessary to make a damage claim to the carrier, don’t move the shipping
carton until it has been examined by the carrier’s representative.
Once the module is fully assembled, it is no longer necessary to keep the empty
carton(s). Dispose of it in accord with local regulations.
Figure 6-1 Rear View of
FlexSet PEX/APA
(Installed)
Unpacking the Shipping Container
The following items should be present in the box containing the PEX/APA kit:
„
FlexSet PEX/APA module
„
One (1) 13mm screw
„
RS-232E cable with RJ-45 jack and 9-pin, D-type female connector
2 Preparing for Installation
RS-232
APA
LINE DC