Tadiran Telecom FlexSet 280, Manual, Page: 54 / 132

3-12
Coral Terminal Equipment
W
all M
ount/D
esk El
evati
on
3
3. Place the stand’s top legs, into the matching narrow slots at the top of the phone
and then push the legs up into the slots to secure them. See
Figure 3-13
for details.
4. Feed the line cable, DC power cable, and the RS-232 cable through the cutout at
the rear of the bracket.
5. Place the stand’s bottom legs, into the matching narrow slots on the bottom of the
phone. See
Figure 3-13
for details.
6. Lift and remove the handset hook (tab), rotate one half turn (180 degrees) and
reinsert it into the cradle of the telephone set, with the projection at the edge tab
extended out. Then place the handset (see
Figure 3-16
on page
3-14
). The rotated
handset hook secures the handset in an upright position.
Figure 3-14 Side View,
Completed Elevating the
FlexSet (60
o
)
Desktop
Elevation
Stand
FlexSet
Line
cord
entry
44
O
60
O
Desk