Getting Started
4
Installation
The EXP20 LCD expansion module works with Tadiran T29G/T27P IP phones. To connect
the EXP20 to the phone more easily, unplug the phone stand from the IP phone before
installation.
Note
To unplug the stand from the IP phone:
1.
Unplug the power adapter and Ethernet cable from the IP phone.
2.
Unplug the handset attached to the IP phone.
3.
Turn the IP phone over and lay it on a non-slip, flat surface.
4.
Unplug the stand from the IP phone.
To install the EXP20 LCD expansion module:
1.
Turn the IP phone and the expansion module over and lay them on a flat, non-slip
surface.
2.
Position the expansion module on the left of the IP phone.
3.
Connect the EXP20 LCD expansion module and the IP phone using the supplied
connecting sheet and screws.
Up to three expansion modules can be connected to an IP phone.
