Sentinel Pro Installation Procedure and Reference Manual
- for Coral IPx / FlexiCom
Troubleshooting
55
Replacing th
e Fuse in a Sentinel
Pro Unit
8
Figure 26 Removing the
Unit Cover
Closing the Unit Cover
To close the Sentinel Pro unit cover:
1. Verify that all internal cables are properly connected, and that the internal
space within the unit is free of foreign objects.
2. Position the internal side of the front panel adjacent to the front side of the
Sentinel Pro unit and lift the rear side of the cover upward.
3. Close the unit cover.
4. Fasten all of the M3 screws with a Phillips screwdriver.
Figure 27 Closing the
Cover
Unfasten all
8 screws and
lift cover
upwards
Place cover
in position and
replace all
8 screws