Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 83 / 510

Coral IPx Office Installation Manual Hardware Installation Procedure
2-39
Eq
uipment Insta
llation
2
0
This section describes how to interconnect the units within the Coral IPx Office
system. For a full description of the different system configurations, see
IPx Office and
IPx Expansion Unit Installation Configurations, page 6-35 .
Table 6-5 lists the possible different combinations of expansion cages that
can be connected to the IPx Office main unit. Do NOT interconnect any other
combination of expansion units to the main unit.
Two types of cables are used to interconnect units within the IPx Office system:
„
For connection to the IPx Office expansion unit, an ESIM Office card and an
ESIX Office card is supplied with a cable including a female, 50-pin SCSI
pin-type connector on one end and a female, 50-pin ribbon-type SCSI
connector on the other end. For connection between two expansion units, an
additional ESIX card is supplied with a cable including a female, 50-pin SCSI
pin-type connector on one end and a female, 50-pin ribbon-type SCSI
connector on the other end.
„
For connection to the IPx 500X or IPx 800X cage, an ESIM Office card is
supplied with a cable including a female, 50-pin, SCSI pin-type connector on
one end and a female, 50-pin D-type connector on the other end. This cable is
not used when IPx Office expansion units are installed.
„
For connection to the FlexiCom 200 CSLX cabinet, an ESIM Office card is
supplied with a cable including a female, 50-pin, SCSI pin-type connector on
one end and a female, 25-pin, D-type connector on the other end. This cable is
not used when IPx Office expansion units are installed.
Interconnecting the IPx Office Main and IPx Office Expansion Units
IPx Office EX Expansion cages require Coral IPx Office Software Version
15.5 or higher.
Connecting the Main Unit to the First Expansion Cage
1. Verify that the ESIM Office card is installed in slot 8-9 of the main unit.
2. Verify that the ESIX Office card is installed in slot 6-7 of the first expansion
unit.
...................................................................................................
11 Interconnecting IPx Office Main and the Expansion Units