Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 54 / 510

2-10
Hardware Installation Procedure Coral IPx Office Installation Manual
Eq
uipment Insta
llation
2
0
1. Inspect the shipping container for evidence of physical damage or
mishandling. Report any damage to the carrier immediately.
2. If it is necessary to make a damage claim to the carrier, do not move the
container until it has been examined by a representative of the carrier.
Otherwise, before opening, move the container as close as possible to the
installation area.
3. Using a utility knife, carefully cut the tape securing the top flaps of the
container and open the flaps.
4. Remove any parts in the depressions of the top foam insert.
5. Remove the top foam insert and set aside.
6. Using an assistant to prevent personal injury, grasp the ends of the cage and
lift it out of the container. Place the cage on a stable surface.
7. Inspect the cage and covers for shipping damage.
8. Check the part list and verify that all the items are present. Table 2-5 lists the
components that are supplied with the Coral IPx Office system.
9. Remove any other items from the shipping container, and move the container
so that it does not interfere with the remaining installation procedures.
...................................................................................................
2 Unpacking the Shipping Container