Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 457 / 510

Coral IPx Office Installation Manual Peripheral Cards
10-37
Se
rvice and
Peripheral Ca
rd
s
10
Tip:
For 8/16Fx installation instructions, refer to
Figure 10-42
.
Table 10-10 U-RMI Office,
U-MR Office, RMI Office
and MR Office features
See
Chapter 9, Shared Service Circuitry
f
or more information about service cards
.
For
U-RMI Office card see
Figure 9-3
.
For
RMI Office card see
Figure 9-4
.
For
U-MR Office card see
Figure 9-5
.
For
MR Office card, see
Figure 9-6
.
Features U-RMI U-MR RMI MR
„
1 internal or external music interface
„
1 external music interface
or
1 external voice paging interface or public
address and relay contacts
„
1 auxiliary or major/minor alarm relay contacts
„
1 universal night answer UNA or central bell
relay contacts
„
2 relay contacts
● ● ● ●
„
1 remote maintenance modem (V.92 ITU-T
standard up to 56Kbps)
●
—
●
—
„
16 DTD circuit dial tone detector and call
progress tone analyzer
(max: 32*)
„
24 DTR circuit DTMF receiver and decoder
card for touch-tone digits
(max: 24*)
„
Eight 3-way conference (
max: 24*)
„
Two Meet-me bridge conference for 14 parties
(max: 6*)
„
16 Caller ID circuit transmitters adapted to
Bellcore standards which includes the time and
Caller Name/Num display
(max: 32*).
Required for
the 4/8T-CID Office card
NOTE: Separate authorization (SAU) is
required to allocate the DTMF, DTR, 3-way
and
conference
circuits supported by the URC.
NOTE:
(max: *)
The maximum number for the
resources is dependent on the number of URC
timeslots. Therefore, increasing one of these
resources requires decreasing another.
● ●
— —