Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 401 / 510

Coral IPx Office Installation Manual Shared Service Cards
9-89
UNA/Bell and
Rela
y-2 (Universal Nig
ht Answering/Cen
tral Bell)
9
0
The Central Bell (UNA) requires the appropriate definitions in the database. Consult
the
Program Interface (PI) and Database Reference Manual for instructions on the
database programming required for the feature.
The following parameters must be set, to enable the paging feature.
1. Card List ( Route: CLIS)
Card type must show RMI-F or MR in the P_TYPE field of Shelf #1, Slot #6 .
2. General Numbering Plan (Route: NPL,0) [11] (Ckt #24)
Use the field 11-Bell of the Update menu to designate dial numbers to the
UNA bell ports in the system.
Refer to Chapter 5 - Numbering Plan , in the Program Interface (PI) and
Database Reference Manual , for more details.
3. Port List (Route: PLIS)
Port type must show UNA in the TYPE field of Shelf #1, Slot #6, Ckt #24 .
Use this field to assign a short/full name to this port.
If you choose 0 - Physical Location , type (Shelf # 1, Slot # 6, Ckt # 24).
If you choose 1- Dial Number , choose field [7] BELL.
Refer to Chapter 6 - System Port List , in the Program Interface (PI) and
Database Reference Manual , for more details.
4. Special Port Facilities (Route: PDB,7)
Use this field to assign this port to a specific tenant group.
Refer to Chapter 23 - Bell/UNA , in the Program Interface (PI) and Database
Reference Manual , for more details.
5. Class Of Service (Route: COS,0) [ UNA]
Use the UNA parameter to determine whether a specific station user is allowed
to dial the Bell port.
Refer to Chapter 7 - Station and Trunk COS , in the Program Interface (PI)
and Database Reference Manual , for more details.
6. Sizes Def (Route: SIZ) [BELL/UNA ]
Use the BELL/UNA parameter to determine the number of Bell/Universal Night
Answering (UNA) groups.
...................................................................................................
4 Database Programming