Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 386 / 510

9-74
Shared Service Cards Coral IPx Office Installation Manual
Music Ba
ckgr
ound
and Music-
On
-Hold (M1/M2)
9
0
Each U-RMI Office , U-MR Office, RMI Office or MR Office card provides two music
sources;
M1 (External/
Internal selectable) and M2 (External)
.
The Music feature requires the appropriate definitions in the database. Consult the
Program Interface (PI) and Database Reference Manual for instructions on the
database programming required for Music.
The following parameters must be set, to enable the Music
feature.
1. Card List ( Route: CLIS)
Card type must show RMI-F or MR in the P_TYPE field of Shelf #1, Slot #6 .
1. Music Sources (Route: SYSGEN,4)
Use this field to determine the number and the location of music sources in the
system. Refer to
Chapter 4 - Music Sources , in the Program Interface and
Database Reference Manual , for more details.
2. Page-Q (Route: ROOT,0,7)
Use this field to determine which music source will be used when a call is
placed on a specific queue. Refer to
Chapter 23 - Page_Q Music , in the
Program Interface (PI) and Database Reference Manual , for more details.
3. SLT_Def (Route: SLT)
Use the MUSIC_ON_HOLD/TRANSFER field to determine which music
source will be used when a call is placed on hold by the relevant port.
4. E&M_Def (Route: TRK,1)
Use the MUSIC_ON_HOLD/TRANSFER field to determine which music
source will be used when a call is placed on hold by the relevant port.
5. KEYSET_Def (Route: KEY)
Use the MUSIC field to activate or cancel background music for a specific
keyset.
Use the MUSIC_NUM field to determine which music source will be
sounded.
Use the MUSIC_ON_HOLD/TRANSFER field to determine which music
source will be used when a call is placed on hold by the relevant port.
6. Hunt Group (Route: HUNT)
Use the MUSIC_SOURCE field to determine which music source will be
sounded for callers that queue on the group.
...................................................................................................
5 Database Programming