Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 375 / 510

Coral IPx Office Installation Manual Shared Service Cards
9-63
Remote Maintenance (Modem
)
9
0
This function requires installation of additional jumpers (P5 and P6, pins 1
and 2 must be connected) on the U-RMI Office and RMI Office cards.
Described
on page 9-61 .
The Modem requires the appropriate definitions in the database. Consult the Program
Interface (PI) and Database Reference Manual for instructions on the database
programming required for the modem.
When the modem exists and is initialized, the PI shows:
1. Card List ( Route: CLIS)
Card type must show RMI-F in the P_TYPE field of Shelf #1, Slot #6 .
2. Port List
( Route: PLIS )
Port type must show MODEM in the TYPE field of Shelf #1, Slot #6,
Ckt #26 .
Use this field to assign a short/full name to this port.
If you choose 0 - Physical Location , type (Shelf #1, Slot #6, Ckt #26).
If you choose 1 - Dial Number , choose field [5] MODEM.
Refer to Chapter 6 - System Port List , in the Program Interface (PI) and
Database Reference Manual , for more details.
2. General Numbering Plan
( Route: NPL,0) [13] (Ckt #26)
Use the 13-MODEM field of the Update Menu, to designate dial numbers to
the modem ports in the system. Refer to Chapter 5 - Numbering Plan, in the
Program Interface (PI) and Database Reference Manual, for more details.
3. Special Port Facilities
(Route: PDB,6)
Use this field to assign this port to a specific tenant group.
Refer to Chapter 23 - RMI Modem , in the Program Interface (PI) and
Database Reference Manual , for more details.
4. Class Of Service
(Route: COS,0) [MODEM]
Use the MODEM parameter to determine whether a specific station user is
allowed to dial to the MODEM. Refer to
Chapter 7 - Station and Trunk COS ,
in the Program Interface (PI) and Database Reference Manual , for more
details.
...................................................................................................
3 Database Programming