Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 129 / 510

Coral IPx Office Installation Manual Software Installation Procedure
4-7
System Database Contr
ol
4
4.2
System Database Control
During normal system operation, the configuration database may be saved to a file on
the IMC8 card for permanent storage. The system may also be programmed to save
the database to IMC8 automatically on a daily basis, at a particular time.
A saved database file may be loaded at any time into the system database memory.
This is a way to restore the database into the RAM of a new MCB Office (and
DBM-X) control card.
Once the database in the system has been constructed, copy the database onto the
IMC8 card. For more detailed information, see
Chapter 21 of the Program Interface
Reference Manual .
1. If a session has not already been established, establish a PI programming
session by entering a PI password.
2. Select the Database Flash Menu (Route: ROOT,0,10,2,2) branch. The Database
Flash menu appears, as follows:
FLASH -MENU
...................................................................................................
1 Accessing the Database Flash Menu
0 - SAVE
1 - LOAD DBS
2 - SHOW FILE INFO
3 - AUTO BACKUP
4 - ERASE