Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 109 / 510

Coral IPx Office Installation Manual Initial Power-up Tests
3-13
Peripheral Interface Car
d Initialization
3
3.4
Peripheral Interface Card Initialization
This section describes how to initialize the peripheral cards. Perform this section only
after the Coral IPx Office has been initialized properly and all expansion cages have
been defined in the system. See
System Initialization, page 3-18
. If the peripheral cards
are inserted before the IPx Office system has initialized and/or expansion units have
been recognized, they will not initialize properly.
The card installation is described in
Peripheral Card Installation, page 2-26
.
The IPx Office system peripheral cards installation and initialization procedure
includes the following steps:
1. Preparing for Initialization
2.
IPx Office Main Unit Initialization
3.
First Expansion Cage or Cabinet Initialization
4.
Second Expansion Cage or Cabinet Initialization
...................................................................................................
1 Introduction