Tadiran Telecom Coral IPx 800 Series, Installation Procedure And Hardware Reference Manual, Page: 91 / 400

Initial Powerup Tests
3-1
Po
wer Sup
ply T
est
3
3.1
Power Supply Test
0
This Chapter provides information about initial tests that must be performed when
first installing a Coral IPx 800 system.
.
The Coral IPx 800 can operate as an AC powered system or as a DC powered system.
„
For PS19 DC powered systems - skip to page
3-2
„
For PS19 DC-D powered systems - skip to page
3-4
„
For PS19 AC powered systems - skip to page
3-6
1 General
Before proceeding, verify that all internal power supplies and circuit cards in the Coral
system are only partially inserted into their respective card slots, with the front panels
protruding approximately 1 inch (2.5cm) from the front of the card cage.