manualshive.com logo in svg

Tadiran Telecom Coral IPx 500X, Installation Procedure And Hardware Reference Manual

Share
Download
Tadiran Telecom Coral IPx 500X Installation Procedure And Hardware Reference Manual Download Page 92

3-2

 

Coral IPx 800 Installation Manual

Po

wer Sup

ply T

est

 

3

0

1.

Verify that the ground wires and the power wires are properly connected. 

 

See 

page 2-17, Ground Wiring

 and 

page 2-22, Wiring DC Powered Systems

.

2.

Verify on the cage rear panel that the POWER SUPPLY DUPLICATION connector 
is not in use. 

3.

Turn ON the external 48VDC Main Power Supply (MPS) or battery charger and 
close any fuse or circuit breaker required to supply 48 VDC to the Coral 
IPx 800cage.

4.

Open the DC Power cover on the rear panel of the cage.

5.

Measure the DC voltage entering the power input terminals. See figures on

 

page 2-22, DC Power Terminal Interconnection

 

page 2-23, Coral IPx 800 Power Wiring for One Cage

 

page 2-24, Coral IPx 800 Power Wiring for One Rack

 

Measure the voltage as follows: 

 

Connect the positive lead of the DMM to the 48V RTN IN terminal. 

 

Connect the negative lead to the –48V IN terminal. 

 

Verify that the reading is 48 volt DC.

2

PS19 DC Powered System

Connecting the POWER SUPPLY DUPLICATION connector (located on the cage rear 

panel) for PS19 DC power supplies will result in damage to the system. This connector 

is only used with the PS19 DC-D power supply. Do not use this connector when the 

PS19 DC power supply is installed.

Electrical Hazard. Electrical currents in the system could cause shock, burn, or death. 

Exercise extreme caution while opening the DC power cover and while performing the 

power checks that follow.

Summary of Contents for Coral IPx 500X

















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands