Tadiran Telecom aeonix TGW4, User Manual

Page: 49 / 141

T G W S IP -F X S /F S O G a te w a y S e rie s
User Manual
Tadiran Telecom
33
SIP Configuration Interface
Figure 2-7
Table 2-7 SIP Configuration Parameters
Name Description
Local signaling
port Configure the UDP port for transmitting and receiving SIP messages, with its default value 5060.
Note: The signaling port number can be set in the range of 1-9999, but cannot conflict with the
other port numbers used by the equipment.
Increments of
port number If "n" (ranked from 1-10) is chosen, after the failure registration of signaling port’s original
configuration, the variation of signaling port’s change ranges from the original signaling port to the
original signaling port +n". Register with the new signaling port value (signaling port +1) until it
succeeds.
Registrar server Configure the address and port number of the SIP registration server. The address and port number
are separated by “:”. It has no default value.
The register server address can be an IP address or a domain name.
e.g. 168.33.134.51:5000 or www.sipproxy.com:5000.
When a domain name is used, you must activate DNS service and configure DNS server parameters
on the network-configuration page.
Proxy server Configure the IP address and port number of the SIP proxy server. The address and port number are
separated by “:”. It has no default value.
The proxy server address can be set to an IP address or a domain name.
e.g. 168.33.134.51:5000 or www.sipproxy.com:5000.
When a domain name is used, you must activate DNS service and configure DNS server parameters
on the network-configuration page.
When a domain name is used, you can fill in a backup IP address in Backup SIP proxy server in
the High Availability configuration. This allows the device to failover to the IP address if the
domain name resolution service fails.