Tadiran Telecom aeonix TGW4, User Manual

Page: 36 / 141

User Manual
T G W S IP -F X S /F S O G a te w a y S e rie s
20
Tadiran Telecom
Table 1-32
Pin Specifications for
TGW96-2G
RJ45 Socket Port
RJ45 Pin Number 1 2 3 4 5 6 7 8
Analog line pair
1
st
Pair 2
nd
Pair 3
rd
Pair 2
nd
Pair 4
th
Pair
TIP1 RING1 TIP2 TIP3 RING3 RING2 TIP4 RING4
Reference color
Orange
white
Orange
Green
white
Blue
Blue
white
Green
Brown
white
Brown
Schematic Diagram of
TGW96-2G
Subscriber Line Connection Figure 1-19
Table 1-33
Corresponding Relation Between
TGW96-2G
RJ45 Socket and Line Number
RJ45 Socket No.
(From Left to Right)
1 2 3 4 5 6
Line No. of This Card 1

4 5

8 9

12 13

16 17

20 21

24
There is a 6 × 4 LED indicator matrixes on the left side of interface board. Each row of LED indicator
matrixes matches four telephone lines on a RJ45. The first row on the left matches Line 1-4
respectively from top to bottom, the first row on the right matches Line 21-24 respectively from top to
bottom, and the middle rows in the same manner.
LED indicators are used for multiple purposes as follows:

Line status indication: this is the most common mode during normal use of equipment. In this mode, if
a line is idle, the indicator corresponding to it goes off; if a line is in call or in use status (such as
ringing, offhook) the indicator corresponding to it goes on.

Line type indication: this is the mode for cable wiring check when installing the equipment. This
mode can be entered by disconnecting Ethernet cables (Both WAN and LAN ports must be
disconnected) at installation stage. After entering this mode, steady on LED indicates that the
corresponding line is equipped as analog subscriber line type, b
linking
LED indicates that the