Tadiran Telecom Aeonix T200M Series, User Manual

Page: 94 / 316

Station Telephony Features 80 T200M Series User Guide (Coral IPx / FlexiCom)
Call Forwarding / Follow Me
Call Forwarding / Follow Me
Calls arriving at your station can be forwarded (all, busy, no answer, timed) to ring at various destinations, depending on the
state of your terminal. In addition to the forwarding options detailed above, your phone distinguishes between calls arriving
from an internal or external source when forwarding.
Calls incoming from an external source only can be forwarded using
[eAll]
,
[eBsy]
,
[eNA]
, and
[eTim]
. Additionally, calls from
Internal and External sources can be forwarded to different destinations, as described on
page 83
. Possible destinations are
operator, station/group, external number via public and private speed call library, DVMS pre-recorded message, UNA/central
bell, group call, or network number (and the station itself for external calls).
A bullet appears next to any active forwarding feature on the Forwarding Options screen (page 2 below), and an additional
bullet appears next to
[Fwd]
on the idle screen (Page 1 below).
Forwarding options are accessed by pressing
[Fwd]
from idle state.
[FwdA]
or
[eAll]
Forward All . Forwards your incoming calls to another destination. The destination can call back or return
calls to your terminal, and you can still place outgoing calls from your terminal.
If
[FwdA]
or
[eAll]
is activated, a
*FwdAll*
message appears on the top line to remind you that this feature has
been activated at your station, and the Distinctive Dial Tone sounds upon lifting your handset (see
Appendix
Page 1
10:50 26 May 2007 Company xyz
user name station number

Msg Log Dir

[Fwd]
Page 2
Call Forwarding
E=External BNA=BusyNoAns

FwdA eAll

Busy eBsy