Operating the Phone
45
T200M Series User Guide (Coral IPx / FlexiCom)
Making Internal Calls
During a Break In
After dialing a busy destination number and choosing
[BrkI]
Upon Hearing Busy Tone on page 40)
can hear your voice. You may press
SPKR
or hang up in order to allow the continuation of the call, or press on one of
the following soft keys.
[Xfer]
Transfer
is used to converse in private with the caller party (from the original 2-way call). The called party is
released. See
.
[Mute]
or
MUTE
Mute
can be activated during a Break In to mute your side, allowing you to listen to the conversation but
not speak. When this feature is activated by
[Mute]
or
MUTE
on/off toggle switch, a bullet appears to the
left of
[Mute]
and
MUTE
LED is lit red. The mute feature deactivates the microphone for your
speakerphone and handset or headset. Press the toggle key again to reactivate the microphone (see
[fRls]
Forced Release
enables an authorized user to end the conversation and release two ports actively connected
to each other.
[Dest]
Destination
is used to converse, in private, with the 3
rd
party. The called party is put on hold. Press again for
3-way conversation.
[Src]
Source
is used to converse, in private, with the called party. The 3
rd
party is put on hold. Press again for 3-
way conversation.
[Wait]
Calls Waiting
can be used to view the number of calls waiting for you during a conversation.
[Num]
Number
is used to briefly display the two port dial numbers instead of the names.
[S/HS]
Speaker/Headset
toggles between speaker and the handset operation. See
.
B TO
called number or name
Xfer
Mute
fRls
Dest
Summary of Contents for Aeonix T200M Series
Page 1: ...Creating a new world of IPportunities T200M Series IP Telephone User Guide Version 16...
Page 2: ......
Page 14: ......
Page 315: ......