Tadiran Telecom Aeonix T200M Series, User Manual

Page: 57 / 316

Operating the Phone 43 T200M Series User Guide (Coral IPx / FlexiCom)
Making Internal Calls
During a Call
The following features are available during an internal call:
[PgQ]
Page Queue places your call on hold by sending it to one of ten Page Queue destinations. You are then free to
page all the system members from your phone and announce that there is a call for Mr. Doe on a specific Page
Queue Line. The call can be picked up from any system station. See
Page Queue on page 164
.
[Xfer]
Transfer passes your call to another destination. Pressing
[Xfer]
places the called party on Hold. Dial a number
(internal or external), and disconnect to transfer the call, or first announce the call and then disconnect. See
Transfer (Xfer) on page 206 .
[Hold]
Hold places the active call on hold. See
Hold on page 139
.
[Mute]
or
MUTE
Mute can be activated during a conversation to mute your side of the conversation (handset, headset and
speaker-phone). When this feature is activated by the
[Mute]
or MUTE on/off toggle switch, a bullet
appears to the left of
[Mute]
and
MUTE
LED is lit red. The mute feature deactivates the microphone for
your speakerphone and handset or headset. Press the toggle key again to reactivate the microphone.
(see Mute Microphone on page 163) .
[Wait]
Calls Waiting can be used to view the number of calls waiting for you during a conversation. See
ACD and UCD Hunt Groups on page 66 .
[Park]
Park your call at your station so that you can pick it up at another system station. See
Park on page 172
.
[Num]
Number is used to briefly display the caller’s dial number instead of the name.
ANSWER 2nd party name or number

PgQ Xfer Hold Mute