Tadiran Telecom Aeonix T200M Series, User Manual

Page: 275 / 316

Setup 261 T200M Series User Guide (Coral IPx / FlexiCom)
System Definitions Menu
System Definitions Menu
The Sysdef function is primarily used for setting various operating parameters for your phone by your system administrator or
qualified technician. These options are set with their factory default values but may be edited as required. To access the setup
options, press and hold
OK until the Main Menu appears (see
page 77
), and then choose Sysdef ; the Sysdef menu
options appear on the display panel.
CAUTION! A password is required as a reminder that these parameters are sensitive and affect the operation of your
phone. This section provides a brief overview of the options available from the Sysdef menu. Changing your phone’s
setup configuration could cause your phone to malfunction. For a detailed explanation of the Sysdef menu, system
administrators can refer to the Installation manual.
The Sysdef menu consists of the following menus and options:
Menus Options
Information • Used to view current IP addresses and parameters for your phone
IP Parameters • Used to enter/edit IP addresses and parameters for your phone
Operating
Mode • Survivability - Enable the system survivability feature for the phone
• Zip Tone - Configure the phone to work in
Zip Tone
mode
Diagnostics • Packets Lost - Displays the amount of packets lost (in percentage) since the last connection
• Average Delay - Displays the average delay statistic since the last connection
• Jitter - Displays packets lost since last connection
• Speed - Displays the network connection speed (10 or 100 Mbps)
• Duplex Mode - Displays the duplex mode (Full or Half)