Setup
255
T200M Series User Guide (Coral IPx / FlexiCom)
Coral Telephony Features
To select priorities:
1. Select the required destinations by pressing the programmed DSS keys.
You can program a maximum of 12 priorities in any order:
•
OUTSIDE Line
: trunk/trunk group/dial service or routing access
•
LOOP
(default access code #121)
•
LOOP Originating Only
(default access code #125)
•
Boss
Group
Line
Key
•
ELA
Line
Key
(see note below)
2. Press
[Set]
or dial the activation code
3. Listen for the confirmation tone.
NOTES!
• If you intend to select an OUTSIDE line as the first priority, you must program a LOOP or LINE key to be able to
dial internal numbers. When activating a feature, press LOOP or LINE first, then dial the required number.
• This feature is useful if you make mostly trunk (external) calls. Assign a preference to an outside line(s), and each
time you make a call, you will be connected directly to an external trunk.
• When ELA lines are selected, the maximum number of
priorities
is reduced. Each ELA line requires three
priority
entries. Therefore, the maximum number of
priorities
available is proportionately reduced by the number of ELA
lines selected. Up to four ELA line keys can be selected.
[Lib]
Private Library
is used to program your personal Speed Dial Directory. A Private Library can be used to
speed dial long numbers. Also, you can use a Private Library to dial external or network numbers for features
that allow only internal destinations such as Call Forward, Divert and Hunt features.
For a full explanation of this feature, see
Speed Dialing: Private Library on page 200
[Safe]
Security Line
is used to block another user from employing the Break In feature on your phone extension.
All Call Waiting and Break In feature tones are blocked. When activated, a caller attempting to break in to
Summary of Contents for Aeonix T200M Series
Page 1: ...Creating a new world of IPportunities T200M Series IP Telephone User Guide Version 16...
Page 2: ......
Page 14: ......
Page 315: ......
