Tadiran Telecom Aeonix T200M Series, User Manual

Page: 22 / 316

Phone Overview 8 T200M Series User Guide (Coral IPx / FlexiCom)
Input/Output Ports and Switches
Input/Output Ports and Switches
These ports are located on the bottom of the phone (see the figure on
page 9
).
Component Description
Reset Button Used to reset the phone to its factory set default values.
Caution:Resetting the phone will rerase all of the defined settings.
Link/Activity
Indicators Indicates whether there is LAN/Intranet and/or PC activity.
LAN Connector
Socket Use this RJ-45 connector port to connect your phone to the LAN/WAN.
PC Connector Socket Use this RJ-45 connector port when only one LAN/WAN outlet is available in your
immediate vicinity. Connect your PC’s LAN wire to this connection socket while the
phone is connected to the LAN/WAN.
Power Adapter Input Used to connect the AC power adapter to the phone to supply the required DC power
when PoE is unavailable.
Note: An AC power adapter supplying 5VDC...2A maximum is required. It is not
supplied with the phone and must be ordered from the manufacturer only. The use of
any other power adapter will void the warranty.
Power Source
Selector (available on
some phones) • Adapter — Switch to this option when a power adapter is connected to the phone.
• PoE: Power over Ethernet — Switch to this option to enable power for the phone
over your LAN/WAN connection.
Handset Cord Port Connect the Handset cord to this RJ-9 port.
Headset Wire Port Connect the Headset to this RJ-9 port.