Station Telephony Features
181
T200M Series User Guide (Coral IPx / FlexiCom)
Programming: Feature Keys
Programming Boss Group Line Keys
Each phone in a Boss Group can be programmed with up to six line keys. The use of programmed line keys assists in defining
the various ways in which a Boss Group can answer incoming calls. To learn about the different uses of Boss line keys, see
To Program Line Keys:
1. Press
[Prog]
.
2. Press the
LINE NN
DSS key you wish to program.
3. Dial Boss LINE feature code (default dial number: #126).
4. Dial the Boss Line number (
00
= first line,
01
= second line, etc. up to
05
). Two digits must be entered.
5. Dial the Boss Group number.
6. Press the selected
LINE NN
DSS key again.
7. Press
SPKR
to release.
NOTE!
Do not perform the above steps if your phone has a button preprogrammed with a number of the
trunk reserved for your Boss Group. This button will be used as a line key.
Summary of Contents for Aeonix T200M Series
Page 1: ...Creating a new world of IPportunities T200M Series IP Telephone User Guide Version 16...
Page 2: ......
Page 14: ......
Page 315: ......
