Tadiran Telecom Aeonix T200M Series, User Manual

Page: 158 / 316

Station Telephony Features 144 T200M Series User Guide (Coral IPx / FlexiCom)
Individual Remote System Services (IRSS) - Freedom
Options available while in an established IRSS call
Function Dial Use to:
Place a new call *1 Listen for a dial tone indicating that you can place a call to a new contact. Your original
conversing party will be disconnected.
Transfer call *2 A dial tone prompts you to enter the required transfer number. Transfer can be screened or
unscreened.
To return to the original conversing party (when transfer destination is busy or does not
answer) dial *2 again.
Switch to Broker/
Consultation/3Way
Conference Call *2 A dial tone prompts you to enter the required third party number. Depending on your Class
of Service definitions, one of the following party functions will be activated (see
Broker/
Consultation/3-Way Conference call on page 145) :
• Broker Call
• Consultation
• 3-Way
• Combination of Broker/Consultation/3-Way Conference Call
Divert call to a Coral
station *3 A dial tone prompts you to enter a divert number. You will be disconnected and your
conversing party will be transferred to the divert number. Your number will not show on the
divert party’s display.
Access voice mail/IVR *4 For instructions on accessing voice mail from an IRSS phone, see below .
Call Recording/
Help Requesting *6 Used to Start/Stop Recording outgoing calls (requires a system-wide defined Navigator application).
Or send Help request (requires a pre-selected system-wide defined keyset station), see
page 137
.