Tadano ATF 130G-5, Translation Of The Original Operating Manual, Page: 497 / 636

6.7 Safety equipment
Electronic automatic safe load indicator, with switch-off function in the event of an overload, warn‐
ing, overload warning, capacity utilisation display, and safety working range function.
Digital displays for working radius, load currently suspended and maximum permissible load, tare
display, boom length, boom angle, pulley-head height, hook travel. Hoisting limiter for highest hook
position. Safety working range functions for telescopic boom angle and pulley-head height, working
radius, and slewing range limit. Further displays for e.g. outrigger base, counterweight, wind speed,
rope fall, fly jib length and angle, lights for anti-twoblock device. VGA screen for displaying: Tele‐
scoping sequence selection, telescoping state, telescoping target, telescoping cylinder length, serv‐
ice information, and system diagnostics functions showing fault/warning messages and fault histo‐
ry.
Speed of movements can be selected by the operator. Slow-stop function for slewing and luffing.
Lift-adjuster function to ensure the load is lifted without swinging (automatic luffing up of the boom
to maintain a constant working radius).
Anti-twoblock device, anemometer on main-boom pulley head, can be removed and attached to the
pulley head of the jib.
Safety valves against pipe and hose ruptures, lower limit switch for safety rope windings on the lift‐
ing drum.
6.8 Electrical system
24 Volt DC system with 80 Ampere three-phase light machine, 2 batteries with 12 Volt 110 Ah
each,
1 rotary beacon at the rear left of the rotary platform next to the hoisting gear, 2 working floodlights
integrated into the superstructure cab, 2 side lights on the boom head.
6.9 Superstructure cab
Crane cab (generously dimensioned and ergonomic) made from steel and plastic, with sliding door,
safety glazing with tinted panels, hinged windscreen, firmly bonded roof panel made from bullet-
proof glass, and hinged rear window. Sliding side access plate driven by motor.
For optimum visibility during crane operation, the work station can be tilted using the infinitely varia‐
ble tilting technology integrated in the cab. It is equipped with an adjustable, hydraulically damped
driver's seat with headrest, mechanically adjustable lumbar support, seat heating, washer and wip‐
er system for windscreen and roof panel, windscreen wipers with intermittent wipe, hourmeter, sun
visor, signal horn, radio/CD player, 24 V and 12 V socket, cup holder.
Display for checking e.g. fuel level and AdBlue supply, hydraulic fluid temperature, on-board volt‐
age, superstructure lock, and for monitoring the engine.
Air conditioning system.
6 Technical Specifications
ATF 130G-5 2146097
2014-09
497