Tadano ATF 130G-5, Translation Of The Original Operating Manual

Page: 200 / 636

Unlocking the superstructure
Prerequisite:
The symbol "superstructure locked" is lit.
Raise the locking pin to its stop, turn it to the right to its stop and lower it to its stop.
The "Superstructure locked" symbol will go out and the "Superstructure can be slewed" symbol will
light up.
3.9.3 Swing mechanism lock*)
Activating the slewing mechanism lock: Press the "Swing mechanism lock on" rocker
switch downwards; the swing mechanism lock will be activated and the pilot lamp in
the rocker switch will light up.
Deactivating the swing mechanism lock:
Press the "Swing mechanism lock on" rocker switch upwards; the swing mechanism
lock will be deactivated and the pilot lamp in the rocker switch will go out.
Locking the superstructure:
Activate the swing mechanism lock, turn the superstructure slowly until the indicator (1) completely
meshes with the tooth (2) of the turntable at the desired stop position.
Press the "Lock/unlock swing mechanism" rocker tip switch downwards until the green
"Swing mechanism locked" pilot lamp lights up.
The green "Swing mechanism locked" pilot lamp lights up; the superstructure is cor‐
rectly locked.
NOTICE
Superstructure cannot be locked!
If the indicator does not mesh correctly with the tooth, the superstruc‐
ture cannot be locked.
1. Turn the superstructure carefully and slowly until it is locked.
3 Operation
200
ATF 130G-5 2146097
2014-09