FPV
-C2
TM
V I D E O C A M E R A 6 0 0 T V L
Tactic’s FPV-C2 fi rst person video camera is great for capturing video images
while mounted in an R/C model. Its small size and weight is perfect for mounting
in tight places. A video transmitter is required to transmit the images to a video
receiver, monitor, or goggles (all available separately). See Tactic’s line of video
transmitters and other equipment at http://www.tacticrc.com/fpv.
INSTALLATION
Various methods can be used to mount this camera, including double-sided tape,
hook-and-loop material, etc. (all available separately). Mount the camera to provide
optimum view, yet with adequate physical protection from impacts. For proper
video alignment, mount the camera so the connector and wires are oriented up
or down.
IMPORTANT!
Keep all components clear of moving parts in/on the
model! Never allow water/liquids to make contact with the camera to
avoid permanent damage to the electronics and/or imaging components.
CONNECT TO VTX & INPUT POWER
Connect the camera to the Tactic
transmitter using the included
harness. To power the transmitter,
connect to the model’s LiPo batteries
balance connector (2~4S). Use one
of the included adaptors if using a
2S or 3S pack.
NOTE:
If your model
uses a 6S battery, you will need to
create a custom adaptor. See your
Transmitter’s instructions for more
information. To power the camera, plug the connector into the receiver or another
4.8~5V source. Do not exceed 5V or you risk damage to the camera. Check the
specs of your ESC to confi rm the voltage.
DIP SWITCH SETTINGS
Switch 1:
Flips the video vertically
Switch 2:
PAL / NTSC formats
Switch 3:
Flips the video horizontally
