The AnyLink2 SLT 2.4GHz
Radio Adapter can greatly
expand a transmitter’s
versatility, allowing it to be
used with a huge variety
of fl ight models, including
Tx-R
™
Transmitter-Ready
™
aircraft (including Select Scale and Micro Tx-R models). AnyLink2 is
capable of full range, to control any size aircraft.
Read this manual in its entirety before use! Damage resulting
from misuse or modifi cation will void your warranty.
ITEMS INCLUDED
(1) AnyLink2 2.4GHz Radio Adapter with 1S LiPo Battery
(1) Cable A – JR
®
, Spektrum
®
, Graupner
®
(1) Cable B – Futaba
®
Square
(1) Cable C – Spektrum, Hitec
®
(1) TC10 USB Charger
(2) Hard Locking Adhesive Strips
(1) Instruction sheet
COMPATIBLE TRANSMITTERS
AND RECEIVERS
AnyLink2 can link virtually any brand transmitter (Tx) to any Tactic brand
2.4GHz receiver (Rx) such as the TR624 or TR625. Transmitters must be
equipped with a functioning trainer jack, and can originally be designed
for use on 72MHz, 2.4GHz, FM, PCM, etc. Go to
www.tacticrc.com
for a
comprehensive Tx compatibility chart. AnyLink2 is not compatible with
non-Tactic brand receivers not having SLT technology.
TX CABLE
See the chart below to determine the cable needed to connect AnyLink2 to
the Tx. Three cables are included, for many Futaba, Hitec, JR, Spektrum,
and Graupner brand radios.
This chart is current as of the date of the printing of this manual. Check
www.tacticrc.com
for the most updated compatibility chart. Transmitters
not listed may or may not be compatible with AnyLink2. See your local
hobby retailer for optional cables for other radio types:
TACM0013 AnyLink2 Cable Futaba/Hitec Round
TACM0014 AnyLink2 Cable Airtronics SD-Series
TACM0015 AnyLink2 Cable Airtronics 5-Pin Round
IMPORTANT:
For some transmitters, connecting a cable to the
trainer jack will automatically cause the Tx logic circuitry to turn
on. When not in use, make sure to disconnect the cable from trainer jack
to prevent the Tx battery from discharging completely.
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions. (1) This device may not cause harmful
interference. (2) This device must accept any interference received,
including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment.
In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, Human proximity to the antenna shall not be less than
20cm (8 inches) during normal operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
INDUSTRY CANADA NOTICE
This device complies with Industry Canada licence-exempt RSS
standard(s). 1. Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation
of the device.” 2. Changes or modifi cations not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding
the IC radio frequency exposure limits, Human proximity to the antenna
shall not be less than 20cm (8 inches) during normal operation.
Avis d’Industrie Canada
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement. Cet appareil numérique ne dépasse pas les Rèlements
sur l’interférence radio par un appareil numérique de classe B stipulées
dans les Règlement sur l’interférence redio d’industrie Canada.
2.Les changements ou modifi cations de cette unité non expressément
approuvés par la partie responsable de la conformité pourraient annuler
l’autorité de l’utilisateur à utiliser l’équipement.
IC RF Déclaration sur la radioexposition:
Cet appareil est conforme avec I’exposition aux radiations IC Défi nies pour
un environnement non contr lé. Les utilisateurs fi naux dovivent suivre les
instructions de fonctionnement spécifi ques pour satisfaire la conformité
aux expositions RF.
CE COMPLIANCE INFORMATION
FOR THE EUROPEAN UNION
Instructions for Disposal of Waste Equipment by Private
Users in the European Union
: This symbol on the product or its
packaging indicates this product must not be disposed of with
other household waste. Instead, it is the user’s responsibility to dispose
of their waste equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic equipment. The
separate collection and recycling of your waste equipment at the time
of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For
more information about where you can drop off your waste equipment
for recycling, please contact your local city offi ce, your household waste
disposal service or location where you purchased the product.
Declaration of Conformity:
Product: Tactic AnyLink2 SLT 2.4GHz Radio Adapter
Item number: TACJ2005
Equipment class: 1
Tactic AnyLink2 SLT 2.4GHz Radio Adapter: The objects of the declaration
described here are in conformity with the requirements of the specifi cations
listed below, following the provisions of the European 2006/95/EC Low
Voltage Directive:
LVD: EN 60950-1:2006 + A11: 2009 + A1: 2010 + A12: 2011
The objects of the declaration described here are in conformity with the
requirements of the specifi cations listed below, following the provisions
of the European R&TTE Directive 1995/5/EC:
Radio: ETSI EN 300 328 V1.7.1: 2006
Technical requirements for radio equipment
EMC: ETSI EN 301 489-1 V1.9.2: 2011, 301 489-17 V2.2.1: 2012
General EMC requirements for radio equipment
Health: EN62311: 2008
US standard: FCC 15.247
Japan Standard: ARIB STD-T66
Canada Standard: RSS 210&RSS GEN
Product name: ANYLINK2
Product type: TACJ2005
Brand: TACTIC
1-YEAR LIMITED WARRANTY
Tactic warrants this product to be free from defects in materials and
workmanship for a period of one (1) year from the date of purchase.
During that period, Tactic will, at its option, repair or replace without
service charge any product deemed defective due to those causes. You
will be required to provide proof of purchase (invoice or receipt). This
warranty does not cover damage caused by abuse, misuse, alteration or
accident. If there is damage stemming from these causes within the stated
warranty period, Tactic will, at its option, repair or replace it for a service
charge not greater than 50% of its then current retail list price. Be sure to
include your daytime telephone number in case we need to contact you
about your repair. This warranty gives you specifi c rights. You may have
other rights, which vary from state to state.
For service on your Tactic product in North America, send it postpaid and
insured to:
HOBBY SERVICES
3002 N. Apollo Dr., Suite 1
Champaign, IL 61822
Tel: (217) 398-0007 (9:00am - 5:00pm CST, M-F)
E-mail: [email protected]
In the European Union, send it postpaid and insured to:
Service Abteilung Revell GmbH
32257 Bünde Germany
Tel: 01805-110111 (nur für Deutschland)
E-mail: [email protected]
●
This product is suitable only for people of 14 years and older. This is
not a toy!
●
WARNING: CHOKING HAZARD - May contain small parts. Keep away
from children under 3 years. Please retain packaging for future reference.
●
No part of this manual may be reproduced in any form without prior
permission.
●
The contents of this manual are subject to change without prior notice.
●
Tactic is not responsible for the use of this product.
Tacticrc.com
Tx-Ready.com
Made in China
TACJ2005MNL V1.0
© 2013 Tactic, a Hobbico company
Distributed in the EU by Revell GmH, Bünde Germany
ANYLINK2
TM
AnyLink2 Transmitter Compatibility Chart
ANYLINK2
MODE
BRAND
MODEL
CABLE
Futaba
®
4YF (72M, 2.4G), 4YBF, 6EX, TJ, 7C, 8FG, 8J, 9C, 10C, 14SG; (12FG, 12Z, 14MZ, 18MZ >
See note page 2 *
)
4VF, 5U, 6A, 6DA, 6H, 6X, 6YF, 6YG, 7U, 7NFK, 8U, 9Z
Hitec
®
Optic 5, Optic 6 Sport, and Eclipse 7 (all on 2.4GHz), Aurora 9
Neon, Flash 4sx, Flash 5, Flash 5sx, Focus 4, Focus 6, Laser 4, Laser 6, Optic 5 (72M),
Optic 6 (72M, 2.4G), Eclipse 7 (72M), Prism 7, Prism 7X
Tower Hobbies
®
4FM, 6FM
4TH, 6XM
Graupner
®
MX-12, MX-16
Walkera
®
Devo 7, Devo 8S
Airtronics
®
SD-5G, SD-6G, SD-10G
Vanguard 4FM, 6FM, RD6000 Sport, RD6000 Super, RDS8000, Radiant 6FM
Spektrum
®
DX4e, DX5e, DX6, DX7, DX7s, DX8, DX9, DX10T, DX18
DX6i
JR
®
All with trainer/DSC jack
B
(Included)
B
(Included)
A
(Included)
A
(Included)
A
(Included)
C
(Included)
C
(Included)
C
(Included)
D
(TACM0013)
D
(TACM0013)
D
(TACM0013)
E
(TACM0014)
F
(TACM0015)
F
F
J
S
J
S
A
H
F
F
H
A
A
1
4
Tactic
c/o Hobbico, Inc.
2904 Research Road
Champaign, IL USA 61826
LiPo
