Online Audio Solutions, LLC – www.tacotunes.com
T A C O T U N E S . C O M
Tacotunes.com would like to thank you for purchasing the ReCurve EZQ. We truly
appreciate your business. This manual is intended to give you a broad overview on how to
install, setup and tune your ReCurve EZQ. Please be sure to review installation videos and
read this manual before you begin your installation. A little planning will go a long way!
After years of customers asking us how to keep their stock head unit and add an amp(s), the
EZQ was developed over a 3 year period to work with Toyota’s head units and their internal
digital signal processor (DSP). Each vehicle manufacturer has a little “twist” to their DSP and
how they will “tune” the factory stereo. This product was developed with your Toyota in
mind. Additionally the turn key plug and play installation for your Toyota makes this the
easiest and fastest way to add an amp(s) to your stock head unit.
Before you begin your install you want to:
1.
Plan the mounting location of your EZQ
2.
Plan the mounting location(s) of your AMP(s).
3.
Plan for the speakers and subs you will be using in your installation.
4.
Routing your signal / power wire coming from your stock head unit to the Recurve
EZQ.
5.
How to wire up the ReCurve EZQ
6.
Register your EZQ within 30 days of purchase to extend your warranty.
http://www.tactounes.com/warranty
Tools you will need to setup the ReCurve EZQ.
1.
Inexpensive Voltmeter
2.
Wire strippers
3.
CD with test tones, you can download them for free from our website or purchase a
disk from our website.
4.
Small screwdriver
5.
Drill / screwdriver to mount the recurve.
