Taconova TACOTHERM FRESH PETA 2, Operating Instructions Manual

Page: 45 / 76

Interval Maintenance work Personnel
Every year Clean the fresh hot water station ( Ä
Chapter 8.3.1 ‘Cleaning the
fresh water station’ on page 45).
Operator
Check the piping and bolted connections in the fresh hot water
station for leak-tightness. If you are unsure, consult a heating
technician.
If there is a leak at any point, replace the bolted connection/seal
or pipe at this point ( Ä
Chapter 8.3.2 ‘Replacing a bolted connec-
tion or pipe’ on page 46).
Operator
Heating and sanitary technician
Check whether all main shut off valves can be closed and
opened. To do so, close each cock once and open it again.
If you are unsure, consult a heating technician.
Operator
Check the cabling in the main junction box, the connection
module and the plug-in connectors for correct fit.
Electrician
Check the water quality.
Heating and sanitary technician
Check the wall fasteners and the housing of the fresh hot water
station.
Operator
Heating and sanitary technician
Check the controller software for updates in accordance with the
documentation for the controller.
Heating and sanitary technician
8.3 Maintenance work
8.3.1 Cleaning the fresh water station
NOTICE!
Property damage due to incorrect cleaning agents!
Aggressive cleaning agents can damage pipes,
bolted connections, the controller or other compo-
nents of the fresh water station.
– Do not use any aggressive cleaning agents.
Personnel:
n
Operator
Protective equipment:
n
Protective gloves
1.
Clean the station using a moist cloth.
2.
WARNING!
Danger of burns due to hot lines!
Clean pipes and bolted connections using a moist cloth or a
brush, and remove any dust.
TACOTHERM FRESH PETA 2 / PETA 2 X Cleaning and maintenance
V02.2020 11/2020 Item no. 215747 EA no. 1329 Operating instructions 45